Table of contents:
225/55 R18 Kleber Dynaxer HP4 variants
No
No
Kleber Dynaxer HP4 is a summer tyre made in total of 120 sizes, ranging from R14 to R14 - this particular dimension is R18, which means it fits to a 18 inch/457.2mm diameter wheel. 225/55 R18 is 70mm wider than the narrowest dimension (155) and 10mm narrower than the widest one (235). This tyre profile of 55 means the sidewall height of the tyre is 55% of the tyre width (225mm), which results in 123.75mm sidewall height. In 225/55 R18, Dynaxer HP4 usually competes against Advantage, which is a tyre from BFGoodrich with a rating of 68%, compared to 76% of the Kleber in question.
Kleber Dynaxer HP4 is made in 120 sizes, starting from 155/65 R14 up to 235/55 R17.
Similar tires
Kleber Dynaxer HP4 in tyre tests
Relevant tyre tests in same or similiar dimension (225/55 R18)
ADAC Summer tyre test 2021 225/50 R17
satisfactory
Ranked #11 of 17
The Kleber Dynaxer HP4 finished 11th among 17 competitors, achieving a final rating of 'Satisfactory'. Praised for its good performance on dry surfaces and its ability to maintain grip and control even at the limit, braking in dry conditions was identified as one of its strengths. However, it did show a noticeable decline with increasing tire temperature. The tire struggled in wet conditions, failing to impress in any specific area and receiving a lower rating for handling. It was criticized for its weak grip and significant loss of lateral support during acceleration and braking, which led to a downgrade due to its only satisfactory performance in wet conditions. The Dynaxer HP4 was particularly noted for having average rolling noise levels and performed slightly better than average in terms of fuel consumption. It received a decent score for wear, indicating slightly higher than expected wear rates. Among the disciplines evaluated, the tire was unsurpassed in exterior noise, indicating its proficiency in minimizing noise pollution.
satisfactory
Ranked #11 of 17
The Kleber Dynaxer HP4 finished 11th among 17 competitors, achieving a final rating of 'Satisfactory'. Praised for its good performance on dry surfaces and its ability to maintain grip and control even at the limit, braking in dry conditions was identified as one of its strengths. However, it did show a noticeable decline with increasing tire temperature. The tire struggled in wet conditions, failing to impress in any specific area and receiving a lower rating for handling. It was criticized for its weak grip and significant loss of lateral support during acceleration and braking, which led to a downgrade due to its only satisfactory performance in wet conditions. The Dynaxer HP4 was particularly noted for having average rolling noise levels and performed slightly better than average in terms of fuel consumption. It received a decent score for wear, indicating slightly higher than expected wear rates. Among the disciplines evaluated, the tire was unsurpassed in exterior noise, indicating its proficiency in minimizing noise pollution.
| Name | Wet | Dry | Noise | Wear | |||
|---|---|---|---|---|---|---|---|
| Best values in test | 2,0 | 1,5 | 2,6 | 1,5 | |||
| Kleber Dynaxer HP4 | 3,1 | 2,3 | 2,9 | 2,5 | |||
| Show test details | |||||||
